Separate names with a comma.
Some features disabled for guests. Register Today.
look at mine, the cutting area is 24,24 inches
I already made the bigger cross beam bracket, look at my build i uploaded the files a couple months back
here is the files we used to create the hold down and the waste board. I tried the cheap board but after a little cutting oil they swell up. I...
think you need a bigger supply, using 4 motors your max is 1.2a max per motor not counting what the tinyg takes and most supply's will start...
what is you power supply rating. volts and amps..............mine is 24volts and 10 amps
I have a tinyg on mine, I have the pots turned CW about 2/3's and slowed down the max speed. here is my settings file for reference
yep I second that...learned the hard way:(
I am using the nema 23 steppers from the store and a 24v 10amp supply and cutting aluminum. every machine is different. I broke bits because the...
Well me and my buddy in crime worked on the new hold down and spoil board Saturday, we both looked at is and decided we over thought the peg...
yep that many holes, what I came up with is these holes fit 5/16" dowel pins so I can line up the material I am working with in the X and Y...
forgot the other part of this piece, this is the counter bores for the 1/4-20 threaded inserts. they worked, didn't have a problem creating them.
David here is you an issue I have ran into with sketchucam, I am laying out a new hold down board and a spoil board, the spoil board is just...
I am running the TinyG with the current pots turned up to about 2/3 and running a 240w / 24vdc supply. since the bit I get come from china, I...
yes calibrate and then some. I used my dial indictors for short runs, but still had issues on long travel. I picked up an aluminum straight edge...
here is a sample of what I do before cutting aluminum. pre test with luan
yep that is the cheap ebay bits I get from china, they say 1/8 but when you measure the cutting tip it is .115. but for a 10 count of bits for...
I use sketchucam by David the swarfer, I think a good portion of the forum uses it, plus if you have issues he sets you on the right path. I use...
I use sketchucam so I am not sure how to help, I just pulled up the gantry and measured and it shows 99.7mm between the top and bottom holes for...
OH snap, this ole Tennessee Hillbilly is getting 15 min of fame ....
we got rid of a lot of flex with the added wheels added on the back, with yours it looks like it is really high off the spoil board and using the...
