Welcome to Our Community

Some features disabled for guests. Register Today.

Looking to upgrade from C-Beam to a C-Beam XL Parts bundle or list help

Discussion in 'CNC Mills/Routers' started by crnrstndes, Aug 19, 2017.

  1. crnrstndes

    crnrstndes Well-Known
    Builder

    Joined:
    Jul 18, 2015
    Messages:
    68
    Likes Received:
    30
    Hi all, I am looking to upgrade my C-Beam to a C-Beam XL. I am looking for a parts bundle kit or list of parts taking into account the parts that can be salvaged from the C-Beam. Has anyone done this or know of a bundle kit or a list available??

    Thanks
    Steve B.
     
  2. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525
    Previous discussion can be found here as well as a number of other locations including some builds. It really comes down to how much you want to put into it as to exactly how much you need to add or replace.
     
  3. crnrstndes

    crnrstndes Well-Known
    Builder

    Joined:
    Jul 18, 2015
    Messages:
    68
    Likes Received:
    30
    Thanks Rick 2.0, I searched through the forums and I couldn't get any real results. My thought it just increase the square inches to allow a wider machine. So I want to recycle as much as I can. My thought is to increase the linear rails to 1000mm and add the x linear actuator bundle and beef up the Y gantry. I realize there will be extra parts but I don't plan on any heavier cutting but looking for a bigger footprint!

    Thanks again
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice