Separate names with a comma.
Some features disabled for guests. Register Today.
I did a couple small test pieces to measure the right diameter, but when making the entire piece I actually got it "good enough" on my first try....
The worktable in the pictures had zero tolerance for the tabs, and required sanding before everything would fit. I have fixed this in the step...
[ATTACH] [ATTACH] [ATTACH]
Thanks! And yep, here's the chair link.. Opendesk - Valoví Chair
[MEDIA][ATTACH] [ATTACH] [ATTACH] [ATTACH] This is a large build I have been working on for the last few months. The goal is to build a...
Going through printing services gets expensive pretty quick.. As much as I would love to have someone try out these parts, I'm not sure it's the...
Yep, it really is a great material! It's not the most rigid, but there are ways to work around that :) Can't wait to see how your build goes!...
@MKD The 60.3mm OD parts are now posted to Thingiverse (Plastic Monstrosity -- The 3D Printed CNC for 4x8' Plywood by spiffcow)
Should be mm.. It's all done in OpenSCAD. This project requires a lot of 3D printed material.. Around 2kg or so, and I recommend using PETG.
I have a 500W generic Chinese spindle.. It does alright with 1/8" bits, but it's really just too under-powered for wood, and it doesn't have an...
Cool, I'll try to get that generated tomorrow. As for mounting sideways: I had originally intended to mount it at a 45 degree angle, but I was...
Oh and the router is RT0701C. If you need something different just let me know the diameter
Oh, I meant to write 5/16" for the bolts btw.. 8mm should work as a substitute for those. Here's the conduit I used.. If you can't find...
Absolutely, I just haven't had time.. I have (accidentally) cut more than 24mm deep and it handled the cut just fine. I'm making this...
First cut with a Makita router... [MEDIA]
