Welcome to Our Community

Some features disabled for guests. Register Today.

SLA (Resin) 3D Printer

Discussion in '3D printers' started by mytechno3d, Jun 10, 2017.

  1. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    108
    Likes Received:
    311
  2. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    How close to producing a print with this machine are you?
     
  3. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    108
    Likes Received:
    311
    Hello ,
    All is in place , i'm just waiting for a second lcd screen to replace the first one ( i broke it :mad: ).
    Fisrt print should be done next week .
    I'm pretty experimented with filament , but it will be my first time with resin ..I can not wait to try .
     
    Anthony Bolgar likes this.
  4. Shortyski13

    Builder

    Joined:
    Mar 28, 2017
    Messages:
    40
    Likes Received:
    9
    Very cool and interesting! What is your total cost for the build, approximately, if you don't mind me asking?
     
  5. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    108
    Likes Received:
    311
    I think it will be around 500-600 euro
     
  6. jackantubis

    Builder

    Joined:
    Jan 10, 2017
    Messages:
    9
    Likes Received:
    2
    Hi, really interesting design ;-) bravo! :) can you share how work your tilt, don't really see it on the pictures, thanks.
     
  7. mytechno3d

    mytechno3d Veteran
    Builder

    Joined:
    Dec 15, 2013
    Messages:
    108
    Likes Received:
    311
    Picture of the Tilt system :
    I use Gcode to make the tilt movement : G1 X200 F100 ( example )
    tilt system.JPG
     
    jackantubis likes this.
  8. staccers

    staccers New
    Builder

    Joined:
    May 15, 2016
    Messages:
    6
    Likes Received:
    0
    Resin inside LCD screen?
     
  9. Craig

    Craig New
    Builder

    Joined:
    Feb 27, 2014
    Messages:
    12
    Likes Received:
    22
    What are you using to spread the light out evenly through the back of the screen. I have been rounding up parts for a smaller version of yours (based on the Utopia 3D Resin Printer ) after I finish another project, and just waiting for a fresnel screen. Not sure how good it will be, while others have used mirrors to spread out the light. Would be interested in what success you have with a larger screen.
     
  10. Techspeakr

    Builder

    Joined:
    Apr 13, 2015
    Messages:
    2
    Likes Received:
    0
    It would be great to see how the cam pulls the vat/lcd away from the build plate. It isn’t obvious to me how the vat is mounted to the top plate and how it is free to pivot. - Doug
     
  11. Beëlzeblub

    Builder

    Joined:
    Oct 17, 2016
    Messages:
    47
    Likes Received:
    2
    Dunno if your still on the forum but i have some questions. :)
    Why a Tilt system? and is't 395 a bit low for the UV? or do you have good results? Speeds/ress
     
  12. evilc66

    evilc66 Journeyman
    Builder

    Joined:
    Jan 9, 2015
    Messages:
    392
    Likes Received:
    153
    395nm is about as low of a wavelength as you will be able to pass through the LCD screen without it being filtered out heavily. Most UV resins will cure just fine at 395nm, just slower.
     
  13. N yob

    N yob New
    Builder

    Joined:
    May 14, 2019
    Messages:
    1
    Likes Received:
    0
    Can you please show a toturial on how to connect the electronics together.please
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice