Welcome to Our Community

Some features disabled for guests. Register Today.

Roberta Clementine

Discussion in '3D printers' started by Jose A. Molina, Jun 9, 2016.

  1. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    Jose A. Molina published a new build:

    Read more about this build...
     
  2. Val Cocora

    Val Cocora Well-Known
    Builder

    Joined:
    May 19, 2014
    Messages:
    172
    Likes Received:
    28
    must be the cheapest 3d printer I've ever seen.
    I like how you used anything you could get your hands on, to build parts.
    The thought of using a DIN rail for precision would scare the hell out of me but hey, if it works, it works.
    Good luck, Jose.
     
  3. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    Lol thanks. Low cost is my mantra. The DIN rail worked fine for a bit. then the grooved bearings wore out. i actually replaced the metal electrical plate with a block of wood that i shaped using a bandsaw. basically by hand. some lithium grease and it actually made a super smooth rail. but i did eventually convert to hardened rod and lm8uu bearings. i don't like them but they havent worn out yet. The whole thing is a test bench for learning and motivating students. i think wood is more approachable then aluminum. but i've gotten openrail to play with now so Alice Clementine will be more durable.

    you can see the wooden rail in the attached picture

     

    Attached Files:

  4. Val Cocora

    Val Cocora Well-Known
    Builder

    Joined:
    May 19, 2014
    Messages:
    172
    Likes Received:
    28
    must say, it's a flinstone version of a 3d printer, and it works.
    I would be scared to use such parts for a precision machine, the mechanical engineer in me would scream and shout.

    why don't you keep the old wooden clementine, and build another aluminum one afresh?
    this way, you can always look back at the beginnings.
     
  5. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    Definitely. Alice is a stand alone daughter. i've made several mistakes so far on the aluminum but i haven't got anything post worthy yet. I've definitely considered keeping Roberta a presentation/teaching model. I've already found and bought better motors for Alice, and Roberta has a mascot vibe i think works to get the kids interested.

     
  6. Val Cocora

    Val Cocora Well-Known
    Builder

    Joined:
    May 19, 2014
    Messages:
    172
    Likes Received:
    28
    looking forward to seeing clementine's sisters.
    best of luck, Jose.
     
  7. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    Thanks. we're heading into summer so things get a little weird for us support staff. We don't get the summer off like teachers. but i have a lot of vacation days coming to get tinkering.

     
  8. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    Right. There's always a way. I think we need to teach that failing forward as many times as it takes gets you to your goal also.

     
  9. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    I am truly amazed that you made it work. Great job! If there is something specific you need in the future to help with your club,. let me know, If I can help, I will.
     
    Jose A. Molina likes this.
  10. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    It was a great learning experience. and Roberta is a great teaching tool. now im working with my kids to get some projects show worthy so we can start fundraising for commercial printers. theres just not enough time in the day to keep fixing roberta while also teaching. lol
     
  11. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    Thank you. ill certainly be at this forum for a while its a great support community and idea bank
     
  12. Giani

    Giani New
    Builder

    Joined:
    Aug 25, 2015
    Messages:
    1
    Likes Received:
    0
    You sir are my new personal hero. :D
    I love the concept here and the adventurous (if not downright fearless) style of engineering: build it, break it, improve it. I tend to get so caught up in endless research and designing that I never get around to actually making something. I've been wanting to make a 3D printer for ages, but the first step in most builds is to 3D print the parts. I call it The Maker's Paradox - to make it you must first have it. o_O
    Your build totally circumvents the Paradox and I am SO making one of these! (after endless hours of designing first, of course...)
     
  13. Jose A. Molina

    Jose A. Molina Well-Known
    Builder

    Joined:
    Mar 7, 2016
    Messages:
    62
    Likes Received:
    61
    Sometimes you just have to start. Hell or high water. I do get stuck all the time too. The way myhead works if i can zig zag around and obstacle I'll do that but if i get stuck I'll sometimes just walk away for bit too. I have a daunting number of halfway finished projects. The key is to have fun. If it's not fun then move on. Mercifully I can say that cause it's not my day job.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice