Welcome to Our Community

Some features disabled for guests. Register Today.

New Profile Posts

  1. Poorfellar
    Poorfellar Eric Girard
    Would you still be interested in printing parts for the OX CNC?
  2. Pancho Villa
    Pancho Villa Martin.Barfoed
  3. Pancho Villa
    Pancho Villa MattiasN
  4. Pancho Villa
    Pancho Villa Neil Rosenberg
  5. Andreas Hadji
    Andreas Hadji Keith Davis
    Hello. I am new in this section I would like to give me some guides for research on how i can build a 3d printer and the theory behind this. Thank you very much.
  6. jim siulinski
    jim siulinski
    Just completing my machine build. Using C-Beam and X-ProV3. Using UniversalGcodeSender with example files.
  7. Subzero_01
    Subzero_01 Rick 2.0
    Hello Rick,

    Can you tell me when will the release of your new laser cutter be please?
    any more details maybe?
    // Oliver
    1. Rick 2.0
      Rick 2.0
      Sorry Oliver but I'm only a forum moderator and not an insider with the company and I have exactly the same limited amount of information that you do. The new laser's announcement was as much a surprise to me as it was to everyone else.
      Sep 5, 2017
      Subzero_01 likes this.
  8. Subzero_01
    Subzero_01 Mark Carew
    Hello Mark,
    Strange that I can not find anything here on site about pending laser engraver release?
    No news, nothing.
    Do you have any date, anything?
    Power, size?
    // Oliver
    1. MaryD
      MaryD
      More details coming this week...
      Sep 6, 2017
      Mark Carew likes this.
  9. Mark Carew
    Mark Carew
    Friday is fun project day!
  10. cdl1701
    cdl1701 Chris Laidlaw
    Sending you a request.
  11. Subzero_01
    Subzero_01 Mark Carew
    Hello,
    Need some advice regarding choosing between C- Beam XL or OX.
    Plans are to later add 17W diode laser on Z axis.
    Which one is to preffer. If I choose OX I will almost att once change it to OX Metal with lead screws so cost will be the same.
    I do not like belts on any machine.
    All tips are wellcome.
    // Oliver
    1. Mark Carew
      Mark Carew
      It sounds like your best set up right out of the gate would be to go with the lead screw driven C-Beam XL if you are wanting a lead driven machine to work with a diode this should work well for you. You can always use it to make plates as well if you decide to go with a larger machine down the road.
      Aug 28, 2017
      Subzero_01 likes this.
  12. GeoffH
    GeoffH Mark Carew
    Changed the 250mm supports with 400mm c-beam, accurately cut by Ooznest (no filing, thank God), now I have great Z travel on the XLarge.
    1. Mark Carew and Ryan Lock like this.
  13. Abird
    Abird
    Knife Maker, Tinkerer and Tool Maker
    1. MaryD likes this.
  14. Ankur Bohra
    Ankur Bohra Dexter Oddwick
    Sir,
    Your black rabbit 1500 can be a great help to our startup... And i will be glad if you can send me link to the part list and compatible hardware, board and controller for windows....
    We will be very thankful.....
  15. Frank Ruhl
    Frank Ruhl
    My guess is 8 lbs 6 oz
    1. MaryD
      MaryD
      Aug 11, 2017
  16. GeoffH
    GeoffH Mark Carew
    Hi, I purchased a C-Beam XLarge kit from Ooznest in the UK; very good experience and producing some really nice parts, 2d and 3d. I wonder if I could get your opinion on changing the 250mm long c-beam Posts that support the X Gantry to say 300mm in order to increase the Z travel?
    1. Ryan Lock likes this.
  17. midosi
    midosi oni305
    Hi I have been using your inkscape extension, Engineering 305. Is there a way to change resolution values? May be have 8px/mm sort of options?
  18. Lodds
    Lodds Mark Carew
    I have just retired and looking to extend my woodworking hobby to include CNC C-Beam machine.
    I'm looking at purchasing this unit from Ooznest in the UK. Can you tell me if their materials are to a satisfactory standards and original concept by Mark.
    I have no idea what I am getting into and not at all sure if all this is within my capabilities anyway especially when it come to the software and design.
    Regards
    Tony
    1. Mark Carew
      Mark Carew
      Hello Tony, Welcome to CNC once you start you will love it! Dive right in and have fun. The Ooznest guys are great and they will have you up and running in no time. The OpenBuilds resource here is the best in the world so be sure to check in on all the helpful tips and ideas here on the forum.
      Aug 3, 2017
  19. Poerdustin
    Poerdustin beardyblair
    Do you have a complete parts list? I am pretty sure i have it narrowed down through your posts and other research but want to order all at once and want to make sure i am not missing anything. Also having trouble nailing down a file for the 2" taller gantry plate complete set chris made for you as i want to have these made locally. Any advice would be greatly appreciated!!!
  20. Gonçalo martins
    Gonçalo martins DiggerJ
    Sorry to be bothering you,
    But I have a problem with my cnc that I can not solve,
    Works fine when I work with Gcode sender manually on the various axes, however, when I submit a G code project, the x, y, and y advances are uncontrollable

    https://youtu.be/KIOs46BwSDI
  21. Gonçalo martins
    Gonçalo martins JustinTime
    Sorry to be bothering you,
    But I have a problem with my cnc that I can not solve,
    Works fine when I work with Gcode sender manually on the various axes, however, when I submit a G code project, the x, y, and y advances are uncontrollable

    https://youtu.be/KIOs46BwSDI

    Arduino UNO x Gshield x Universal G Code Sender 1.0.8
  22. Gonçalo martins
    Gonçalo martins Serge E.
    Sorry to be bothering you,
    But I have a problem with my cnc that I can not solve,
    Works fine when I work with Gcode sender manually on the various axes, however, when I submit a G code project, the x, y, and y advances are uncontrollable

    https://youtu.be/KIOs46BwSDI
  23. Gonçalo martins
    Gonçalo martins Carl Feniak
    Sorry to be bothering you,
    But I have a problem with my cnc that I can not solve,
    Works fine when I work with Gcode sender manually on the various axes, however, when I submit a G code project, the x, y, and y advances are uncontrollable

    https://youtu.be/KIOs46BwSDI
  24. Gonçalo martins
    Gonçalo martins Kyo
    Sorry to be bothering you,
    But I have a problem with my cnc that I can not solve,
    Works fine when I work with Gcode sender manually on the various axes, however, when I submit a G code project, the x, y, and y advances are uncontrollable

    https://youtu.be/KIOs46BwSDI
    1. Kyo
      Kyo
      Hello Goncalo,
      This would be a perfect question to post to the forum at large. I have not used Gcode sender in a while. Go ahead and start a new thread, and if possible post up the Gcode file that is giving you problems so it can be tested / reviewed. From the video it appears to be a work position or homing issue.
      Jul 7, 2017
      MaryD likes this.
  25. Gonçalo martins
    Gonçalo martins Giarc
    Sorry to be bothering you,
    But I have a problem with my cnc that I can not solve,
    Works fine when I work with Gcode sender manually on the various axes, however, when I submit a G code project, the x, y, and y advances are uncontrollable

    https://youtu.be/KIOs46BwSDI

    Arduino UNO x Gshield x Universal G Code Sender 1.0.8
  26. Gonçalo martins
    Gonçalo martins Elmo Clarity
    Sorry to be bothering you,
    But I have a problem with my cnc that I can not solve,
    Works fine when I work with Gcode sender manually on the various axes, however, when I submit a G code project, the x, y, and y advances are uncontrollable

    https://youtu.be/KIOs46BwSDI

    Arduino UNO x Gshield x Universal G Code Sender 1.0.8
  27. Gonçalo martins
    Gonçalo martins Jonny Norris
    Sorry to be bothering you,
    But I have a problem with my cnc that I can not solve,
    Works fine when I work with Gcode sender manually on the various axes, however, when I submit a G code project, the x, y, and y advances are uncontrollable

    https://youtu.be/KIOs46BwSDI
  28. Gonçalo martins
    Gonçalo martins dddman
    Sorry to be bothering you,
    But I have a problem with my cnc that I can not solve,
    Works fine when I work with Gcode sender manually on the various axes, however, when I submit a G code project, the x, y, and y advances are uncontrollable

    https://youtu.be/KIOs46BwSDI

    Arduino UNO x Gshield x Universal G Code Sender 1.0.8
    1. dddman
      dddman
      Can you send me your gcode file? It looks like you have a 25.4 factor :P (sees metric measurement (say 100mm) and moves 100 inches instead)
      Jul 7, 2017
    2. Gonçalo martins
      Jul 7, 2017
  29. Gonçalo martins
    Gonçalo martins GrayUK
    Good Morning,
    Sorry to be bothering but I have a problem with my cnc:

    He is using Arduino one and G-shield, and Universal G sender

    It works well with the G sender manually on the various axes, however when
    Sending a project to cut it advances in x + and gets uncontrolled.

    Or rather loses the coordinates.

    I really do not know what I'm doing wrong.

    Someone who can help me.
    1. GrayUK
      GrayUK
      Hi Goncalo
      As I have previously written below, I'm afraid I am more conversant with the mechanical side of CNCs rather than the electronics. I think you will be much better off starting a thread in the General Area of the Forum, rather than within my own Profile.
      Sorry I can't be of more help.
      Gray
      Jul 7, 2017
  30. Gonçalo martins
    Gonçalo martins Mark Carew
    Good Morning,
    Sorry to be bothering but I have a problem with my cnc:

    He is using Arduino one and G-shield, and Universal G sender

    It works well with the G sender manually on the various axes, however when
    Sending a project to cut it advances in x + and gets uncontrolled.

    Or rather loses the coordinates.

    I really do not know what I'm doing wrong.

    Someone who can help me.
    1. Mark Carew
      Mark Carew
      Hello @Gonçalo martins I do not have this particular setup but I will give some advice that may help.
      Not sure if this will help but from this statement "Or rather loses the coordinates." it seems to me that it could be your unit of measure (mm/in) not set right in your code vs. the control software.
      Jul 7, 2017
    2. Mark Carew
      Mark Carew
      This is a long shot but to be honest though to tell from whats explained. If this does not work for you please use the support forums to work with the community to see if we can try to figure out what may be going on.
      Jul 7, 2017
    3. Mark Carew
      Mark Carew
      Jul 7, 2017