Build List
-
Active Filters:
h
![OpenBuilds Sphinx 55 (20](https://openbuilds.com/data/article_images/l/7/7197.jpg?t=1529019228)
Build Author
Mark Carew
Views
47606
OpenBuilds Sphinx 55 (20" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
![K40 Laser Build (Major Changes)](https://openbuilds.com/data/article_images/l/5/5867.jpg?t=1510191534)
Build Author
Superslinky
Views
8633
K40 Laser Build (Major Changes)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Major K40 Laser Mod
Corexy laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I have tested my Opt Lasers laser module on a "open" frame for some time. Decided that I want to test a corexy setup and combine it with a boxed/enclosed design - my goal is to get high precision + a safe setup with protection from the laser light + a fan to extract the smoke/exhaust..
![Modified Sphinx 55 with MGN12 linear rails](https://openbuilds.com/data/article_images/l/9/9456.jpg?t=1596345440)
Build Author
Wes Dwight
Views
6046
Modified Sphinx 55 with MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Inspired by previous Sphinx builds by Sorin (w/ MGN Rails) and Kenneth's witthuhnCNC XKLBR-1S. I wanted to create a desktop unit that kept a minimal profile and neatly contained the PS, Controller, and all wiring, making it a singular unit that could be easily transportable (as it will be doing double duty at my home and at work)
Custom push cart for CNC machines
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I’m custom building a push table / cart for my cnc machines mostly out things I already had in my garage. Using a gray push utility cart as the main body and building around that.
Pro Light 1000 CNC Machining Center Rebuild
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Replacing the Pro Light control box with a Open Builds BlackBox.
Phlat Printer 3 meets Open Builds
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
I will go over the attachments for the PP3 Z axis. soon. Before any thing else .You need to know the first PP3 ,used SKP 7 and Mach 3. Later on they used CNC USB.
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
138718
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
![ACRO 1010 with custom Z axis](https://openbuilds.com/data/article_images/l/9/9879.jpg?t=1617581867)
Build Author
Jacob Christiansen
Views
5360
ACRO 1010 with custom Z axis
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.
![Oven Dog](https://openbuilds.com/data/article_images/l/9/9877.jpg?t=1616811814)
Build Author
Genetoys
Views
2346
Oven Dog
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a printer that can fit inside and operate at ~200 C oven temperatures
![Racoon CNC](https://openbuilds.com/data/article_images/l/9/9623.jpg?t=1605312916)
Build Author
Stokrotka74
Views
5705
Racoon CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
Laser engraving machine
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Second better project, high durable mainframe, silent work, non vibration.
V-Slot 2020 EggBot
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
To build a simple EggBot
![Scroll-saw Spiral Cutter](https://openbuilds.com/data/article_images/l/9/9872.jpg?t=1616597739)
Build Author
RSch
Views
3220
Scroll-saw Spiral Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Attached to a scroll saw you can cut nested wooden spirals with this jig. Make two, three, four ... interlocking spirals that unwind/unscrew. Fascinating toys or art objects!
![The BlackBee CNC](https://openbuilds.com/data/article_images/l/9/9848.jpg?t=1615570664)
Build Author
CNCGear
Views
8616
The BlackBee CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ball screw drive, linear rail CNC Kit
![C-Beam® XLarge Linear Actuator](https://openbuilds.com/data/article_images/l/7/7424.jpg?t=1532975801)
Build Author
Mark Carew
Views
19666
C-Beam® XLarge Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
This OpenBuilds C-Beam XL actuator is the backbone of a lot of the awesome builds put together by the OpenBuilds community
![27](https://openbuilds.com/data/article_images/l/9/9116.jpg?t=1593321340)
Build Author
mathom713
Views
8569
27" by 40" CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
DIY design and build of a roughing 2' by 3.5' CNC router
first CNC build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
It start out to be an upgrade of a CNC 3018-PRO but ended up being a full build
DRO
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
Belt drive linear scale for Mill and Lathe
Improved CBM
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet another build of an improved C-Beam Machine, improving stiffness, size, versatility, and strength without increasing costs much.
![Motorized mic stand](https://openbuilds.com/data/article_images/l/9/9755.jpg?t=1611514033)
Build Author
Sergei Starovoitov
Views
3273
Motorized mic stand
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This system allows you to adjust the position of the microphone remotely
![Grizzly G0758 Benchtop Mill Conversion](https://openbuilds.com/data/article_images/l/7/7754.jpg?t=1540491599)
Build Author
Rob Taylor
Views
8954
Grizzly G0758 Benchtop Mill Conversion
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A proper CNC mill conversion. But quite small, with my trademark idiosyncracies.
![Wanhao Duplicator i3 Plus - Major rebuild.](https://openbuilds.com/data/article_images/l/8/8330.jpg?t=1550862847)
Build Author
John Pollman
Views
6035
Wanhao Duplicator i3 Plus - Major rebuild.
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Major rebuild of my Wanhao Duplicator i3 Plus.
![C-Beam Sphinx](https://openbuilds.com/data/article_images/l/7/7952.jpg?t=1543675427)
Build Author
Vin1027
Views
6124
C-Beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.
![Rack and Pinion Cartesian Mill](https://openbuilds.com/data/article_images/l/9/9020.jpg?t=1576955758)
Build Author
Joe F
Views
6952
Rack and Pinion Cartesian Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
CNC China Router Conversion to Open Builds System
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
CoreXY Cubish
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
Phoenix Alpha
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Hobby project
![Router / plasma cutting table ( Rack and pinion )](https://openbuilds.com/data/article_images/l/8/8838.jpg?t=1572632620)
Build Author
mytechno3d
Views
24291
Router / plasma cutting table ( Rack and pinion )
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy DIY plasma cutting table
LEAD CNC 1010 Laser Modification
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Easy All-in-One Laser and Mounting Kit for your Openbuilds CNC.
![Mighty Chihuahua](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
Jose Alezandre
Views
1328
Mighty Chihuahua
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The idea was to use materials from previuos failed projects into a succesful one. I have build this tiny but powerfull CNC machine mainly using the universal gantry plates for the X and Y axis. Also another innovative part is the fact that I assembled the Z gantry with 2 aluminum sections of 20X40 and one aluminum seccion of the 20X20. I used NEMA 17 stepper motors with GT2 pulleys. This was designed on Fusion360
Big Ox Heavy Duty
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A Heavy Duty version of the standard Big Ox build.
My build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I am satisfied with my build and next one will be even better.
![Lead CNC 1510 modified](https://openbuilds.com/data/article_images/l/8/8843.jpg?t=1572455082)
Build Author
Marco964
Views
7825
Lead CNC 1510 modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.
![Plywood Built CNC Router](https://openbuilds.com/data/article_images/l/8/8769.jpg?t=1567635339)
Build Author
Project Hopeless
Views
12934
Plywood Built CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is my first build attempt, a large form (4x4ft.) 3 axis 4-motor CNC router table, . The build components are Baltic birch plywood, stepper motors, SBR linear bearings, and ball screws, LinuxCNC, Mesa controller.
![Nema 23 Belt and Pinion Actuator](https://openbuilds.com/data/article_images/l/7/7510.jpg?t=1536083314)
Build Author
Mark Carew
Views
14476
Nema 23 Belt and Pinion Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!
![Mining Rig](https://openbuilds.com/data/article_images/l/7/7201.jpg?t=1529396612)
Build Author
mytechno3d
Views
4245
Mining Rig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Crypto Mining rigs with vslot rail
Horizontal CNC V-Beem v1
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
V-Beem horizontal milling machine built on OpenBuilds components. Simple structure, great expansion possibilities, high stiffness.
![Cut To Length Machine](https://openbuilds.com/data/article_images/l/1/1749.jpg?t=1423405435)
Build Author
mytechno3d
Views
14671
Cut To Length Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
A Cut To Length machine controlled by computer
Mini-OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.
![CNC Sand and Spraycalk drawmaschine](https://openbuilds.com/data/article_images/l/4/4792.jpg?t=1492879931)
Build Author
kallibaba
Views
31817
CNC Sand and Spraycalk drawmaschine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
A little CNC Sand and Spraycalk drawmaschine More and details in the next weeks
Charging Ox CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A heavily modified Ox CNC build to replace SO2.
![Sphinx Derived Router](https://openbuilds.com/data/article_images/l/9/9234.jpg?t=1583687307)
Build Author
Corey Corbin
Views
3824
Sphinx Derived Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I Like the Sphinx design thought I would attempt my first build. I wanted to build this and use Arduino controller with GRBL to be able to learn and understand my machine.
![LayerFused X301 - CoreXY Large Volume Printer](https://openbuilds.com/data/article_images/l/9/9491.jpg?t=1598379323)
Build Author
Robert Mech
Views
7767
LayerFused X301 - CoreXY Large Volume Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.
![PeeNaPle_V1.4b](https://openbuilds.com/data/article_images/l/9/9470.jpg?t=1597368590)
Build Author
Crazzy French Dude
Views
3797
PeeNaPle_V1.4b
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1
![Sphinx rigid XL](https://openbuilds.com/data/article_images/l/4/4903.jpg?t=1492143643)
Build Author
Apothus
Views
20952
Sphinx rigid XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Rigid variant of the C-Beam sphinx platform
![V-King CoreXY](https://openbuilds.com/data/article_images/l/7/7699.jpg?t=1539181070)
Build Author
Roy Berntsen
Views
23588
V-King CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source
![Was once a mini mill](https://openbuilds.com/data/article_images/l/7/7328.jpg?t=1531492528)
Build Author
dreys
Views
10223
Was once a mini mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Working progress.
Massive Hotwire Foam Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
CNC Hot Wire Foam Cutter. Lathe, Turntable and 4 axis Cutter. Can cut XPS and EPS.
![Openbuilds CNC (witthuhnCNC XKLBR-1S)](https://openbuilds.com/data/article_images/l/9/9231.jpg?t=1582637850)
Build Author
Kenneth Witthuhn
Views
7362
Openbuilds CNC (witthuhnCNC XKLBR-1S)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.
Tall OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates
![A custom arcade](https://openbuilds.com/data/article_images/l/9/9379.jpg?t=1592581616)
Build Author
ajdubs
Views
3508
A custom arcade
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an arcade "cabinet" of sorts built almost entirely from OpenBuilds extrusions. Save for a few 3d printed parts, the electrical components, the acrylic panels, and the monitor mount, every component was purchased from the OpenBuilds part store.
![Cartesian 3d printer](https://openbuilds.com/data/article_images/l/9/9377.jpg?t=1592562585)
Build Author
Leboeuf
Views
3757
Cartesian 3d printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is the build of a cartesian 3d printer made of an old Anet and Geeeteck, some 2020 alu profil and linear rail. Powered by a Rumba with a Nextion screen. It should be modular and accept dual Extrusion and laser engraving.
Bored in the garage enclosure build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
2 days to build Up and running some EMI issues but I think I have them resolved Big shoutout to the community
Learning how to build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I made a 5x10 foot cnc out of the parts I bought on this site. It's been upgraded and tinkered with ever since. The end goal is to learn enough to learn to build a large 10x10 foot 3d printer.
![Sphinx Z-axis upgrade](https://openbuilds.com/data/article_images/l/7/7512.jpg?t=1539834608)
Build Author
Andreas Bockert
Views
10487
Sphinx Z-axis upgrade
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.
![OX-Metal CNC Router Mill](https://openbuilds.com/data/article_images/l/3/3681.jpg?t=1467782548)
Build Author
Schematix
Views
152414
OX-Metal CNC Router Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
Piggy back engraver for ShopBot
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Built from leftover T-Slot extrusions plates and hardware from other defunct projects.
ApiNui - CNC Router ( an oversized workbee )
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Based on the WorkBee CNC, this is an oversized router built with a specific use-case in mind, for manufacutring beehives, and beehive components
1200X600 SPHINX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Need cnc to make alumunium sign, brass stamp, etc
1000 x 1000 Workbee powered by X controller
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A standard 1000x1000 Workbee powered by an X-controller using a Hitachi router
![Back and forth rail mechanism](https://openbuilds.com/data/article_images/l/9/9288.jpg?t=1586916302)
Build Author
Tristen Poliseno
Views
2150
Back and forth rail mechanism
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I have the whole description and all the details in the "Body" section!
WorkBee Saving Lives
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Using the WorkBee to protect doctors against Corona virus.
![Paintbot painting cnc](https://openbuilds.com/data/article_images/l/9/9266.jpg?t=1584976841)
Build Author
Alexander Leiser
Views
13231
Paintbot painting cnc
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
Custom painting machine in designed and wrote the software for. Paintings are with acrylic color on canvas
![C-Bot](https://openbuilds.com/data/article_images/l/1/1146.jpg?t=1456323895)
Build Author
Carl Feniak
Views
278337
C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
![MakerSL MSL-8 OB Vise](https://openbuilds.com/data/article_images/l/4/4084.jpg?t=1478073275)
Build Author
Sonny Lowe
Views
15086
MakerSL MSL-8 OB Vise
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Small Machining Vise designed around 20x80 Openbuilds Rail System
![Ultra sun cutter](https://openbuilds.com/data/article_cat_images/l/0/295.jpg?t=0)
Build Author
Daniel Stewart
Views
1176
Ultra sun cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A sun cutter only using mirror and glass balls with x and y table movement
![workbee 1510](https://openbuilds.com/data/article_images/l/9/9201.jpg?t=1583436500)
Build Author
jeff johnson
Views
4751
workbee 1510
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Getting more height out of the !510
![Lead 1010 Build - Anything but stock.](https://openbuilds.com/data/article_images/l/9/9206.jpg?t=1582316575)
Build Author
Forestbird Originals
Views
3916
Lead 1010 Build - Anything but stock.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.
![OpenBuilds PowerCase](https://openbuilds.com/data/article_images/l/7/7836.jpg?t=1542228986)
Build Author
Mark Carew
Views
6615
OpenBuilds PowerCase
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem
SharkBits Holder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Get organized with the SharkBits Holder!
![Niko’s Egg-painter robot (OpenBuilds)](https://openbuilds.com/data/article_images/l/1/1953.jpg?t=1427845771)
Build Author
gianakop
Views
43760
Niko’s Egg-painter robot (OpenBuilds)
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
This EggBot design has a perfect functionality (the same as the original EggBot professional), a perfect cable and microcontroller arrangement, and a perfect cost as it uses a minimum list of parts (with one V-Slot Linear Rail size20mm x 80mm and length 500mm you can build 3 EggBots!)
OX TWO in ONE
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
What I'm doing is pretty self explanatory. I've put a few pictures up
Dragon Too Plasma Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A Benchtop Plasma Cutter Concept
![BldrBot S2](https://openbuilds.com/data/article_images/l/0/632.jpg?t=1580431332)
Build Author
Keith Davis
Views
17902
BldrBot S2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Prusa i3 design running on Open Build's mini V wheels
Ox cnc improvements chain driven
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Just ox cnc experiment
Core XY Beast
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super solid core xy build inspired by the e3d tool changer
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8202
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
![Senior Project CNC table](https://openbuilds.com/data/article_images/l/9/9107.jpg?t=1578545546)
Build Author
DaleShaw
Views
3455
Senior Project CNC table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
So for my senior project I decided to build a CNC router. I kind of need to get this done before May so we'll see what all goes down. It's going to be a 3 axis machine (for now) and will be able to handle 4x8 sheets of wood. This is my first build. It's going to be intresting..
Behemoth cnc router with linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Behemoth cnc router build in progress using hiwil rails and closedloop servos.
![MiniMill Smoothie](https://openbuilds.com/data/article_images/l/5/5293.jpg?t=1503798101)
Build Author
Andrew Helsel
Views
11016
MiniMill Smoothie
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
MiniMill with DW611 and SmoothieBoard 4x v1.1
![3D printed CNC Machine](https://openbuilds.com/data/article_images/l/9/9082.jpg?t=1577592341)
Build Author
Darren Dickson
Views
3143
3D printed CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
So I thought I would make the Leon van den Beukel version three 3D printed CNC Machine, it is the third incarnation so you would expect a relatively bug-free CNC Machine with a strong foundation.
![OpenBuilds Sphinx 1050 (20](https://openbuilds.com/data/article_images/l/7/7196.jpg?t=1529007338)
Build Author
Mark Carew
Views
29153
OpenBuilds Sphinx 1050 (20" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
PhlatMDF48
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a Phlat based CNC for MDF processing. Capacity of 48" x unlimited length.
![RigidOko](https://openbuilds.com/data/article_images/l/5/5766.jpg?t=1545414342)
Build Author
SecretSpy711
Views
19926
RigidOko
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!
LayerFused C201 - DIY 3D Printer Build, i3 Style
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My DIY 3D Printer build which is similar to an i3 style printer. This is a fully documented step-by-step build with videos.
Sphinx 55 with 3D Printed Addons
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably other parts as they come up.
Rise of the Sphoenix
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I am building a Sphinx 55 from the bones of my old C-Beam machine. Rising from the ashes so to speak.
Two color Drawmachine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
GRBL, vvvv, drawbot, penchanger, custom plates
![K40 C02 Laser Rail System](https://openbuilds.com/data/article_images/l/5/5270.jpg?t=1499547785)
Build Author
megashub
Views
21583
K40 C02 Laser Rail System
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
An Openbuilds replacement rail system for the common eBay "K40" C02 Laser Cutter
![V-Slot™ Mini V Linear Actuator](https://openbuilds.com/data/article_images/l/0/48.jpg?t=1444073092)
Build Author
Mark Carew
Views
88178
V-Slot™ Mini V Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Learn to build the V-SLOT Mini V Modular linear Actuator System and create all kinds of cool machines!
![C-Beam Mods](https://openbuilds.com/data/article_images/l/8/8929.jpg?t=1571893487)
Build Author
tmadrms
Views
6077
C-Beam Mods
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam machine mods.
![Laser Cutter/Engraver OptLaser 6W with Z-axis](https://openbuilds.com/data/article_images/l/5/5994.jpg?t=1512767059)
Build Author
RobSaunders
Views
15505
Laser Cutter/Engraver OptLaser 6W with Z-axis
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
This was my first attempt for a laser platform. I'm using the OpenBuilds ACRO 20"x40 platform, 6W OptLaser, homemade z height and the xPro driver board.
![OpenBuilds Workbee 1050 (40](https://openbuilds.com/data/article_images/l/7/7199.jpg?t=1529026299)
Build Author
Mark Carew
Views
24481
OpenBuilds Workbee 1050 (40" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
![CoreXY - e3d inspired](https://openbuilds.com/data/article_images/l/7/7021.jpg?t=1525161852)
Build Author
j0achim
Views
11070
CoreXY - e3d inspired
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
![Hyatt and My Journey to Tonehenge](https://openbuilds.com/data/article_images/l/7/7945.jpg?t=1543606004)
Build Author
Craig Hollabaugh
Views
3644
Hyatt and My Journey to Tonehenge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?
![Modified LEAD machine](https://openbuilds.com/data/article_images/l/8/8805.jpg?t=1568735843)
Build Author
mjenkins5720
Views
1977
Modified LEAD machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Cnc od grinder and thread grinder
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a totally original build of an od id grinder and thread grinder, I hope.
![CoreXY 3D build one](https://openbuilds.com/data/article_images/l/4/4874.jpg?t=1569010665)
Build Author
recoush
Views
7526
CoreXY 3D build one
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
![The FEEDBACK FRACTAL Build](https://openbuilds.com/data/article_images/l/8/8518.jpg?t=1557431974)
Build Author
Cortellini
Views
3246
The FEEDBACK FRACTAL Build
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)