I will be updating this as I go along and hopefully along the way I will have my own unique contributions to share with the community. For starters I would like to give a huge thank you to Mark Carew for designing such a solid platform for this build to stand on. And another thanks to Ryan Lock for the OOZNEST updates/instructions.
The parts are starting to arrive
Open builds really knows how to pack!
First round of parts came off the printer. Big shout out to Gyrex on Thingiverse for the Models
Models can be found here
Ooznest OX CNC Machine (3D Printed ABS/PETG Parts)
I had my first casualty today. I had myself some fried Arduino for lunch. should always remember to unplug things before touching power leads....
Motors just came in with a bit of work needed to make them work
The Nema23 steppers i received have only two hole and came with an anti-vibration plate attached
I decided to roll with them and this is how it went.
1. Making sure the round nubs are facing up, Drill and Tap as such. (I used a 7/32'' drill bit)
2. Next drill out the motor.
3. Success! (extra spacers may be required on Z axis mount)
Took the plunge today and started cutting the rails. Successful in the end; Although I'm sure different tools would have made it easier. I'm still waiting on the x plates and all the wheels, but here is how it sits right now...
Wheels came in today along with the eccentric spacers