Select a Category
Build Author Rob Taylor Views 13338
DSLR Video Slider
A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.
Build Author gjwest Views 19049
Time Lapse Camera Rail
This is my first go at building a simple Time lapse camera rail system using as much pre-existing hardware and software as I could.
Build Author cbordeleau Views 3299
OpenBuilds C-Beam Double Slider
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
Build Author cbordeleau Views 1684
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Build Author snokid Views 3998
C-beam Camera slider
feel kind of bad calling this a build because of pretty much everything is off the shelf parts. I'm writing my own sketch right now for the motion but there is a version or 2 floating around on the net based of this design. I will post my code once it's done.
Build Author Bear Views 6945
ANOTHER OX!~ Huge Thanks to Marc Carew and Open Builds. The primary reason I am building this CNC mill is to aid in my homemade snowboard creation. I am going to try and document as much of everything as I can and post it here to help others going a similar route. I know from past projects that taking the time to document each step can be tedious when you want to charge ahead but I will try! I hoping to get feedback on my design choices and set up as I am a complete newbie to CNC.
Build Author inhan Views 3011
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
Build Author tonkajeep34 Views 10955
DIY GoPro Camera Slider
A compact portable DIY camera slider for time lapse photography using a GoPro.
Build Author cor5151 Views 1961
no xp cnc
This is my first cnc build, never used one before and don't know too much besides what i've read a little bit about them online. It's probably going to be about 31" y axis with hopefully around 4ft x axis, z height is still to be determined.