Welcome to Our Community

Some features disabled for guests. Register Today.

Build List

  • Active Filters:
    2

DIY Embroidery Machine V2

Jun 11, 2019
Category
Everything Else
Build Progress
Build Complete!

My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.

OpenBuilds OX CNC Machine

Apr 23, 2021
Category
Cartesian Style CNC
Build Progress
Build Complete!

OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

Indie i2

Mar 10, 2021
Category
Cartesian Style Bots
Build Progress
Build Complete!

A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.

Embroidery machine with XY belt and pinion drive.

Apr 22, 2014
Category
Everything Else
Build Progress
Build in Progress...

A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.

CO2 laser.

Jul 10, 2014
Category
LASER - PLASMA BUILDS
Build Progress
Build in Progress...

Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.

Sphinx 55 on MGN12 linear rails

Sep 8, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw

UK40OB

Mar 9, 2020
Category
Laser Cutter Builds
Build Progress
Build Complete!

Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.

Standalone Torch Height Controller for CNC Plasma Cutting

Mar 4, 2021
Category
Plasma Cutter Builds
Build Progress
Build Complete!

A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)

Openbuilds Co2 80w Laser Cutter

Apr 28, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.

Custom build 80w Co2 Laser Cutter

Jan 18, 2022
Category
Laser Cutter Builds
Build Progress
Build Complete!

Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.

A simple XY laser engraver/cutter

May 31, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.

Phlatformer v2

Aug 29, 2015
Category
VACUUM FORMING MACHINES

Hello, I have been looking around for a vacuum forming machine for a long time, and could not find one that was either in my price range or was safe enough for me to want in my home. The Phlatformer answers both of these requirements... Unfortunately, it was not available in either cut-out or...

Rawcnc 1.5 Desktop Edition

Jul 11, 2018
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.

TrueUp Kit Version

Aug 10, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.

Hlidskjalf, CoreXYU (dual X-carriage)

Jan 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.

C-Beam Rigid - 'The Hog'

Apr 25, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.

LS-LASER

Oct 3, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.

Openbuilds rovo laser mini(오픈빌드)

Sep 16, 2015
Category
Laser Cutter Builds
Build Progress
Build Complete!

laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.

RigidOko

Sep 3, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

Heavily upgrading my 1200x500 Shapeoko 2... ...er, wait, scratch that... Building an all new machine, roughly the same size, that should be more rigid than a Shapeoko 3!

UltiFaker 2 Go

Mar 21, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.

SOLAC: Space Optimized LAser Cutter

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

Small Portable PCB CNC Machine (CoreXY)

Jun 24, 2015
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is a small CNC mill/router specifically for manufacture PCBs. This is based on the corexy gantry setup. The plan is to have a small, light self-contained machine that can be used and easily but away when it's job is done.

45W CO2 Laser Build

Jun 10, 2021
Category
Laser Cutter Builds
Build Progress
Build Complete!

A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.

Beamlazer Laser cutter CO2 100W

Jan 4, 2020
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.

Cricut Expressions 2 to ESP32 GRBL Control

Nov 18, 2018
Category
Everything Else
Build Progress
Build in Progress...

A log of my "brain surgery" on a Cricut Expressions 2 to change the control board to something open so that I could cut what I wanted. The ESP32 GRBL board I used has bluetooth and WIFI built-in and was very easy to get working just the way I wanted.

M4: 1510SS Heavy Mk.I

Aug 22, 2020
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.

Upgrading the C-Beam machine

Jan 20, 2017
Category
Other Style CNC Mills
Build Progress
Build in Progress...

So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.

INDY-TR12 CNC (12mm Diameter Lead Screws)

Jun 7, 2019
Category
Cartesian Style CNC
Build Progress
Build in Progress...

TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.

Fixed Gantry CNC Router with Old Industrial Supplies

Oct 8, 2019
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.

Nema 23 Belt and Pinion Actuator

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This easy to build and effective system can take your builds to the next level! This design is strong and accurate and could be the solution/upgrade that you've been looking for!

RONIN OX | The G10/Carbon Fiber Hogger

Nov 19, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.

Emmett-Delta

Oct 21, 2016
Category
Delta Bots
Build Progress
Build in Progress...

Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.

C-Beam XLarge X/Y Table

Oct 25, 2019
Category
ACTUATOR
Build Progress
Build Complete!

This OpenBuilds C-Beam XLarge X/Y Table is a great display of how easy it is to modify and create awesome configurations with the OpenBuilds system!

Build #2 - Bigger & Stronger

Jan 11, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9

Rob's C-Beam Machine XLarge

Feb 28, 2018
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.

L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.

CO2 Tube life expectancy experiment - Sponsored in part by Openbuilds

May 11, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hypothesis - Running CO2 laser tubes at high amperage may shoirten tube life in number of hours, but will be made up for by the increase in actual inches engraved/cut using the higher power. This is a long term experiment, so the build status will remain as "Build in progress" until the experiment has been completed.

RiNo Route

Jan 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build Complete!

A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated

MULIMATERIAL 3D PRINTER (in progress)

May 16, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build

+Laser

Sep 2, 2018
Category
Laser Cutter Builds
Build Progress
Build Complete!

A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.

D&R Tiger Paw build combo

Feb 17, 2019
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.

Black Rabbit 1500

Sep 2, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.

(Smaug) 100w 1500x1000mm CNC Laser

May 11, 2021
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Laser CNC made with mostly Openbuilds and amazon sourced components. Lots of 3d printed components as well. The main purpose is to cut EVA foam.

Live D-bot build at MRRF 2017 (Mar 25-26)

Mar 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.

Fun and Functional Laser Build

Sep 12, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

A very fun and fulfilling build. I can't say enough about the whole Open Builds site and Open Source movement. I strongly believe this is the fastest and most creative way of getting ideas out of the mind, and onto the floor.

Y-1200 co2 laser

May 31, 2022
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Y-1200 Build The Y-1200 has a cutting area of 1200 x 600mm and the main chassis has a external size of 1620 x 955 x 450mm. The recommended power output is 60-90W, this can also be increased with the use of an extension box. designed by furtherfabrication ROB CHESNEY FREELANCE INDUSTRIAL DESIGNER.

C-Beam Prototype

Jul 15, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.

CNC Line Boring Machine

Aug 8, 2016
Category
Everything Else
Build Progress
Build Complete!

This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice