Welcome to Our Community

Some features disabled for guests. Register Today.

OTHER BUILDS/PROJECTS

COTSPnP

May 1, 2015
Category
Everything Else
Build Progress
Build in Progress...

The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.

CNC Glass Grinder

Nov 21, 2016
Category
Everything Else
Build Progress
Build Complete!

This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.

Modular Controller PCBs

Sep 3, 2017
Category
Circuit - Software Project
Build Progress
Build in Progress...

This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.

Stinger-Panting Images in the Air

Sep 20, 2018
Category
Circuit - Software Project
Build Progress
Build in Progress...

Stinger displays images in the air by using a single column of LEDs. Special computer code converts graphics to pixels; then, the pixels are send to the strings of LEDs, which with the help of of the motor's fast movement the most colorful are displayed on thin air.

Ball Trajectory Machine

Nov 23, 2018
Category
Everything Else
Build Progress
Build Complete!

Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.

CNC Coating Machine

Dec 1, 2018
Category
Everything Else
Build Progress
Build Complete!

The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.

Phlat Printer 3 meets Open Builds

Apr 27, 2021
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

I will go over the attachments for the PP3 Z axis. soon. Before any thing else .You need to know the first PP3 ,used SKP 7 and Mach 3. Later on they used CNC USB.

MOVABLE ART TO SCREEN WALL-MOUNTED TV

Jan 17, 2021
Category
Furniture Builds
Build Progress
Build Complete!

This project produced a movable framed canvas to cover a wall-mounted flat-screen TV when not being viewed, which at the touch of of a switch moves down below the TV and sound bar. The same switch is used afterwards to return the artwork up to cover the TV again. Photo shows mechanism without the canvas frame. See other photos.

LEGO BOX

Jun 20, 2023
Category
Furniture Builds
Build Progress
Build Complete!

Discover our unique DIY project that blends creativity, utility, and sustainability. This guide will take you through the construction of a LEGO display box, ingeniously crafted using offcuts of V-SLOT aluminium profiles and OpenBuilds accessories. Not only is this an eco-friendly approach to reusing surplus materials, but it also results in a stylish, functional display for your prized LEGO models. Whether you're a LEGO enthusiast or have little LEGO fans at home, this innovative project offers

Kitchen Space Saver

Aug 7, 2015
Category
Furniture Builds
Build Progress
Build Complete!

The frame is made from all open builds parts, add the rubber feet and pads for the glass. The glass is clear 12" x 16" x 1/4" with a polished edge. A light basket slides on the countertop.

Sheethexapod

Dec 10, 2016
Category
Everything Else
Build Progress
Build Complete!

Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.

Nightfuel

Feb 4, 2018
Category
Everything Else
Build Progress
Build in Progress...

The user will input a selection from a variety of pre-established drinks. The user will not need a glass, since it will be provided in the automation process. This completely eliminates the need for a bartender if an RFID purchase system is implemented.

Clear Acrylic Dust Shoe

Mar 17, 2019
Category
Everything Else
Build Progress
Build Complete!

Attaches router with screw clamping. Clear Skirt is 2" long or can be made longer if requested. Works well keeping dust within the chamber. It can be made to fit shapeoko, ox cnc, workbee, xcarve, 6040, laguna,piranha, millright etc. with similar setup including Bosh, Makita , dewalt 611 routers or spindles.

Sim Racing rig

Oct 23, 2019
Category
Everything Else
Build Progress
Build Complete!

Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds

MakerSL MSL-65 Manual Coffee Grinder Stand

Jan 5, 2020
Category
Everything Else
Build Progress
Build in Progress...

I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.

Model train lift - scale HO

Mar 12, 2020
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

This build is about a model train lift in a secure and dust free storage. It is a roll on/roll off concept for a model train layout.

Microwave Filter Tuner

Apr 8, 2020
Category
Everything Else
Build Progress
Build Complete!

The Microwave Filter Tuner (MFT) combined with the University of Regina’s tuning algorithm automatically tunes microwave filters by using a custom CNC machine with a computer vision system for identifying, mapping, and tuning each filter element, providing improved consistency, flexibility, and accuracy compared to traditional methods. The MFT is low cost and is capable of tuning multiple filter configurations with minimal preparation.

T Nut Holder for V Slot

Jun 27, 2020
Category
Everything Else
Build Progress
Build Complete!

This is a T Nut Holder for OpenBuilds V Slot System. Useful when you want to keep t nuts in place, for example when you're mounting something vertically.

Custom push cart for CNC machines

Mar 13, 2021
Category
Furniture Builds
Build Progress
Build in Progress...

I’m custom building a push table / cart for my cnc machines mostly out things I already had in my garage. Using a gray push utility cart as the main body and building around that.

Remote Toiler Flusher!

Jan 2, 2022
Category
Everything Else
Build Progress
Build Complete!

This project provides an easy method for my granddaughter to use the facilities in the smallest room of the house! The toilet cistern is located in the garage and was originally manually activated by a pushbutton connected via a cable. The location of the pushbutton - combined with the stiffness of the mechanism made it tricky for her to use. This project provides a solution to the problem.

OpenPull From CNC Kitchen.. attempt

Feb 20, 2022
Category
Everything Else
Build Progress
Build in Progress...

This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.

cnc plasma table

Apr 5, 2015
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

ive got most of the wire harness made up too im using Chinese electronics for now I will upgrade later when this thing makes me some cash lol im using a ibm think center to case to hold my electronics ive got a 25' parallel cable to put some distance between the table and the computer

Work Bench Stand

Oct 29, 2015
Category
Furniture Builds
Build Progress
Build Complete!

Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.

PiDuinoCNC Controller

Feb 23, 2016
Category
Circuit - Software Project
Build Progress
Build in Progress...

Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.

Epoxy dispenser, to apply non-conductive epoxy to electronic board.

Feb 19, 2017
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.

Screen Mesh Stretching

Nov 10, 2017
Category
Everything Else
Build Progress
Build in Progress...

The intention of this project is so that the mesh is on the well stretched frame, and thus there is a better production of frames.

Quack Ball

Mar 5, 2018
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.

32 Button Hand Pendant for the PlanetCNC Control Board

Feb 24, 2018
Category
Circuit - Software Project
Build Progress
Build Complete!

This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.

Modified LEAD machine

Sep 27, 2019
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.

Sturdy Motorized Photographic Copy Stand

Feb 1, 2023
Category
Camera Sliders - Rigs
Build Progress
Build in Progress...

i would like to build a sturdy motorized photographic copy stand. i have hobbled together a hand crank version using a used umbrella pole but it is not suitable as it is awkward and wobbly.

Foldable Rainwater Collector

Jun 28, 2014
Category
OTHER BUILDS/PROJECTS
Build Progress
Build Complete!

Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.

C-beam Camera slider

Nov 15, 2015
Category
Camera Sliders - Rigs
Build Progress
Build in Progress...

feel kind of bad calling this a build because of pretty much everything is off the shelf parts. I'm writing my own sketch right now for the motion but there is a version or 2 floating around on the net based of this design. I will post my code once it's done.

Amazon Special

Feb 10, 2017
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,

Angle grinder converted into electric drill

Jan 13, 2020
Category
Furniture Builds
Build Progress
Build Complete!

How to convert an angle grinder into an electric drill? Remove the angle grinder, leaving only one main motor, and then find a suitable intermediate roller with a point drill to assemble it.

Loading...
Loading Build images...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice